| Feature | Value |
|---|---|
| ZCoupling C1 | |
| Control voltage A1 / A2 | DC 24 V |
| Allowable tolerance | + / - 10 % |
| Power consumption | 0,5 W |
| Contact configuration | 1 SPDT |
| Max. switching voltage | AC 250 V |
| Max. Switching capacity - NO contact | AC: 250 V, 2000 VA, 8 A for ohmic load 250 V, 3A for AC-15 DC: 30 V, 240 W, 8 A for ohmic load 24 V, 2A for DC-13 |
| Max. Switching capacity - NC contact | AC: 250 V, 1500 VA, 8 A for ohmic load 250 V, 2A for AC-15 DC: 30 V, 240 W, 6 A for ohmic load 24 V, 2A for DC-13 |
| Distance to neighboring devices with the same power dissipation | 0 mm for loads ≤ 6 A 10 mm for loads > 6 A |
| Contact protection - normally open contact | 10 A gG |
| Contact protection - normally closed contact | 6 A gG |
| Min. contact load | 2 V / 10 mA |
| Contact material | AgNi 90/10 |
| Service life | mech. ca. 10 x 106 Zyklen |
| Max. wire width | 2,5 mm2 / 14 AWG |
| Max. tightening moment | 0,5 Nm |
| Typ. switch-on delay | 8 ms |
| Typ. switch-off delay | 15 ms |
| Dielectric strenght | 6 kV (Control voltage / Contacts) 2.5 kV (Contact / Contact) |
| Rated isolation voltage | 250 V |
| Degree of pollution | 2 |
| Overvoltage category | 3 |
| Degree of protection | IP20 |
| Temperature range | -15 °C bis +55 °C (Vgl. Derating) |
| Max. altitude | ≤ 2000 m (above sea level) |
| Weight | 70 g |
| Cabinet | Cabinet with minimum degree of protection of IP54 |
| Mounting | 35 mm DIN-Rail (EN 60715 TH35) |
| Order No. | 456010 |
ZCoupling C1 coupling relay
Pre-assembled relay with one changeover contact and socket with push-in connection technology and integrated overvoltage protection.
The ZCoupling C1 coupling relay is used for the galvanically isolated coupling of signals such as PLC outputs to the periphery.
- One changeover contact with up to 6 A, 230V AC
- Compact housing - 6.2 mm width
- Signaling of the switching status via LED
- 35 mm DIN Rail (EN 60715 TH35