| Feature | Value |
|---|---|
| ZX09A | |
| Applications | Packaging machines, cutting facilities, bottling plants, gluing stations, plastic injection moulding machines, camshaft controller |
| Supply voltage | DC 24 V +/- 15% |
| Digital inputs | 10 x DC 18..30 V |
| Digital outputs | 4 x DC 10..30 V; 0.5 A |
| Analog inputs | 1; 0..10 V or 0..20 mA, 12 Bit |
| Analog outputs | - |
| INTERFACES: | |
| RS485 / RS422 | 2 |
| SSI | 1 (2 - with reconfigured RS 485 interface); 10 Mbit/s, Multi-Turn, Single-Turn |
| Ethernet | 1; (10Base-T or 100Base-T) programming interface, expansion connector |
| Response time | < 20 ns |
| Logic Capacity: Amount of configurable Logic Blocks (CLB´s*) | 715 CLBs; *each CLB includes more than 100 Gates, FlipFlops |
| Process time digital inputs / outputs | < 3 μs |
| Time delay analog inputs | < 70 µs |
| Max. input frequency | 500 kHz |
| Number of programmable timer | 70-300 |
| Programming | EX_PRESS 5 for Windows Structured Text according to IEC61131-3 |
| Width | 108 mm |
| Order No. basic module | 589201 |
| Order No. software EX-PRESS 5 | 589092 |
ZX09A high-speed-controller
Downloads
The ZX09A is high-speed programmable logic controller (PLC). It can be used as an independent PLC, as well as a decentralised PLC within a Network, for parallel processing of signals in real time.
For this the ZX09A provides ten digital inputs and four digitals outputs. The ZX09A Controller additionally provides an analog input and two RS485- and up to two SSI–Interfaces. ZX09A provides a network connection through an Ethernet-Port.
With it, the PLC can be connected with a PC, to load the program onto and configure the PLC, as well as directly with one additional PLC, or through a switch, with a network. The programming of the PLC is done via the program-development-software EX_PRESS 5 (Order No.: 589092).