|Applications||Packaging machines, cutting facilities, bottling plants, gluing stations, plastic injection moulding machines, camshaft controller|
|Supply voltage||DC 24 V +/- 15%|
|Analog inputs||4 x 0..10 V (set)
2 x 0..10 V or 0..20 mA (switchable)
|Digital inputs||2 x DC 18..30 V|
|Digital outputs||4 x DC 10..30 V; 0.5 A|
|RS485 / RS422||2|
|SSI||1 (with configurable RS485-Connection);
10 Mbit/s, Multi-Turn, Single-Turn
|ZanderLink||2 High-Speed Protocol < 10 µs, via RS485|
|Ethernet||1; (10Base-T or 100Base-T),
programming interface, expansion connector
|Response time||< 20 ns|
|Logic Capacity: Amount of configurable Logic Blocks (CLB´s*)||715 CLBs;
*each CLB includes more than 100 Gates, FlipFlops
|Process time analogue inputs||< 10 µs|
|Process time digital inputs / outputs||< 3 μs|
|Max. input frequency||500 kHz|
|Number of programmable timer||70-300|
|Programming||EX_PRESS 5 for Windows Structured Text according to IEC61131-3|
|Order No. software EX-PRESS 5||589092|
The ZX09D is a high-speed programmable logic controller (PLC) without cycle time. It can be used as an independent PLC, as well as a decentralised PLC within a Network, for parallel processing of signals in real time.
For this the ZX09D provides 6 analogue inputs and 2 additional digital inputs. ZX09D provides a network connection through an Ethernet-Port.
With it, the PLC can be connected with a PC, to load the program onto and configure the PLC, as well as directly with one additional PLC, or through a switch, with a network. The programming of the PLC is done via the program-development-software EX_PRESS 5 (Order No.: 589092).
The controller has two RS485-Interfaces. This makes a communication via Modbus RTU possible. A high-speed connection with other ZANDER ZX controller via ZanderLink with a speed < 10 µs is as well possible.
One RS485-Interface is as well usable as SSI-Interface, for the connection of encoders / distance sensors