MINOS Series
MINOS SL are safety emergency stop modules for monitoring emergency stop buttons, safety doors and light curtains, as well as contact reinforcement of safe outputs (e.g. safe PLC outputs) to machines and plants.
MINOS SLxE
The Safety emergency stop module MINOS SLxE fulfills max. requirements up to PL e / SILCL 3 (according to EN ISO 13849-1 bzw. IEC 62061). Test pulses at the safe output enable error detection during operation.
SL1E for dual-channel emergency stop circuit, safety door monitoring with short circuit monitoring
SL2E for light curtains, OSSD output or single-channel emergency stop
MINOS SLxD
The Safety emergency stop module MINOS SLxD fulfills max. requirements up to PL d / SILCL 2 (according to EN ISO 13849-1 bzw. IEC 62061). Test pulses at the safe output enable error detection during operation.
SL1D for dual-channel emergency stop circuit, safety door monitoring with short circuit monitoring
SL2D for light curtains, OSSD output or single-channel emergency stop
MINOS SD1E
MINOS SD1E is a safety emergency stop relay for monitoring emergency stop buttons, safety doors and light curtains, to machines and plants.
The modules are also certified for operation in furnaces according to EN 50156-1 as well as EN 746-2. For use in the process industry these modules are certified according to IEC 61511-1.
MINOS SD1K
MINOS SD1K is a safety emergency stop relay for contact reinforcement of safe outputs (e.g. safe PLC outputs) to machines and plants.
TALOS Series
The compact safety controller TB-I14O3 meets the highest safety requirements Cat. 4 / PL e according to EN ISO 13849-1 and is therefore ideally suited for the protection of machine tools and machines. In addition, the TB-I14O3 is certified for the use in furnaces in continuous operation according to EN 50156-1.
TALOS® TB-I14O3
The compact safety controller TALOS® TB-I1403 from 0 to 990 sec has incorporated the desired functionality in a flexible manner. The desired configuration can be selected and individual functions such as delay times can be parametrized directly on the device via the menu in an easy and quick manner.
TALOS® TB-I14O3m
The compact safety controller TALOS® TB-I1403m from 0 to 990 min has incorporated the desired functionality in a flexible manner. The 14 safety inputs can be variably linked, with or without time functions, with 3 safety and 6 auxiliary outputs by means of logic.
TALOS® TB-I14O3h
The compact safety controller TALOS® TB-I1403h from 0 to 99 h has incorporated the desired functionality in a flexible manner. The desired configuration can be selected and individual functions such as delay times can be parametrized directly on the device via the menu in an easy and quick manner.
TE-OR3
The TE-OR3 is certified in compliance with the high safety requirements according to DIN EN 13849 and EN 62061, the TE-OR3D is in addition specially designed and certified for the use in furnaces and ancillary equipment in continuously mode according to EN 50156-1.
SCB Series Safety Timer
The SCB series offers different types with 2 safe semiconductor and/or 2 safe relay contacts:
All these variants are available with the following adjustable delay times:
SCB-04
2 safe relay contacts2 safe semiconductor outputs
Variants of the time-delays:- 0 bis 99 s- 0 bis 99 min- 0 bis 99 h
The SCB-04 is a universally applicable safety timer, with which the moving parts of a machine or plant can be brought to a standstill quickly and safely. A simple and accurate time parametrization is possible with a push/rotary button and the built-in display.
SCB-03
3 safe semiconductor outputs
Variants of the time delay:- 0 - 99 s- 0 - 99 min- 0 - 99 h
The SCB-03 is a universally applicable safety timer, with which the moving parts of a machine or plant can be brought to a standstill quickly and safely. A simple and accurate time parametrization is possible with a push/rotary button and the built-in display.
SCB-02
2 safe relay contacts
The SCB-02 is a universally applicable safety timer, with which the moving parts of a machine or plant can be brought to a standstill quickly and safely. A simple and accurate time parametrization is possible with a push/rotary button and the built-in display.
SCB Applications
The following applications have been realized with the Safety Timer SCB:
SR-Series
With the safety relays of the SR series, we offer a modular series for the protection of humans as well as machines. They monitor the function of the connected safety sensors along with the wiring and function as power amplifiers for shutting down the connected power contactors or drives in a safe and supervised manner.
SRLC
The basic relay SRLC is a universally applicable safety relay, with which the moving parts of a machine or plant can be brought to a standstill in a hazard situation, quickly and safely.
SR2C
The basic relay SR2C is a universally applicable safety relay, with which the moving parts of a machine or plant can be brought to a standstill in a hazard situation, quickly and safely.
SR3C
The basic relay SR3C is a universally applicable safety relay, with which the moving parts of a machine or plant can be brought to a standstill in a hazard situation, quickly and safely.
SR7C
The basic relay SR7C is a universally applicable safety relay, with which the moving parts of a machine or plant can be brought to a standstill in a hazard situation, quickly and safely.
SR4C
The SR4C is a safety relay, which combines the non-delayed and delayed contacts in an extremely compact housing. As a result, dangerous parts of a plant can be switched off quickly and safely during an emergency.
SREC
The extension relay SREC coupled with any basic device of the ZANDER SR series, allows to obtain up to 3 additional and time delayed safety contacts per device. In this way, an existing system can be modularly extended in practically any manner.
SRTC
The extension relay SRTC coupled with any basic device of the ZANDER SR series, allows to obtain up to 3 additional and time delayed safety contacts per device. In this way, an existing system can be modularly extended in practically any manner.
S2HC
The two-hand safety relay S2HC corresponds to EN 574, type III C and is specially designed for the use in safety circuits, e.g. on pressing, stamping and bending tools. Machines can be actuated only when two buttons are pressed with both hands at an interval of 500 ms.
SK3D
The SK3D is an all-purpose safe coupling relay with three safe relaycontacts. It ensures the quick and safe deactivation of the moving parts of a machine in case of danger. The SK3D couples safe signals of e.g. pulsed PLC’s to the periphery for galvanic isolation and power adjustment.
SR3A
SR3A is a safety switching device specially designed for sensors with antivalent logic (normally open / normally closed combination).
In case of danger, the moving parts of a machine or system can be quickly and safely shut down via three safe relay contacts.
Spacer
Elevator-Series
The new Zander safety relay SR3E is especially designed for the use as a safety component for elevators according to the latest version of the approvals EN 81-20:2014 and EN 81-50:2014 and is certified by TÜV Rheinland.
Your advantage: This relay is also certified for the use in elevator body / elevator car – this means a shorter wiring path and space gain.
A widespread application spectrum is enabled through the additional certification up to PL e, SILCL 3, Category 4 according to EN ISO 13849-1:2015 / EN 62061:2005 + A2:2015 / IEC 61508 Part 1-2 and 4-7:2010.
SR3E
The safety relay SR3E is especially designed for the use as a safety component for elevators according to the latest version of the approval EN 81-20:2014 and EN 81-50:2014 and is certified by TÜV Rheinland. A widespread application spectrum is enabled through the additional certification up to PL e, SILCL 3, Category 4 according to EN ISO 13849-1:2015 / EN 62061:2005 + A2:2015 / IEC 61508 Parts 1-2 and 4-7:2010.
Firing-Series
Specially designed for the use in furnaces in continuous operation according to EN 50156-1 Zander developed several safety relays and safety controller, which are all type approved by TUV Rheinland.
SR3D
The SR3D is a universally applicable safety relay with three safety relay outputs, specially designed for the use in furnaces in continuous operation according to EN 50156-1. Additionally, it is certified by the Germanischer Lloyd under 32915-06HH and thus, approved for use at sea.
SR3AD
SR3AD is certified for furnaces in continous operation. Application in the process industry.
SR3AD is a safety switching device specially designed for sensors with antivalent logic (normally open / normally closed combination).
SCB-04 EN50156-1
The SCB-04 is a universally applicable safety timer, with which the moving parts of a machine or plant can be brought to a standstill quickly and safely. A simple and accurate time parametrization is possible with a push/rotary button and the built-in display. The SCB is certified according to the standards DIN EN 50156-1, 746-2 and IEC 61511-1.
SCB-03 EN50156-1
The SCB-03 is a universally applicable safety timer, with which the moving parts of a machine or plant can be brought to a standstill quickly and safely. A simple and accurate time parametrization is possible with a push/rotary button and the built-in display. The SCB is also certified according to the standards DIN EN 50156-1, 746-2 and IEC 61511-1.
SCB-02 EN 50156-1
The SCB-02 is a universally applicable safety timer, with which the moving parts of a machine or plant can be brought to a standstill quickly and safely. A simple and accurate time parametrization is possible with a push/rotary button and the built-in display. The SCB is also certified according to the standards DIN EN 50156-1, 746-2 and IEC 61511-1.
TALOS® TB-I14O3 50156-1 and 746-2
The compact safety controller TALOS® TB-I1403 from 0 to 990 sec has incorporated the desired functionality in a flexible manner. The 14 safety inputs can be variably linked, with or without time functions, with 3 safety and 6 auxiliary outputs by means of logic. TALOS is certified aacording to the standards DIN EN 50156-1, 746-2 and IEC 61511-1.
TALOS® TB-I14O3m 50156-1 and 746-2
The compact safety controller TALOS® TB-I1403m from 0 to 990 min has incorporated the desired functionality in a flexible manner. The desired configuration can be selected and individual functions such as delay times can be parametrized directly on the device via the menu in an easy and quick manner. TALOS is certified aacording to the standards DIN EN 50156-1, 746-2 and IEC 61511-1.
TALOS® TB-I14O3h 50156-1 and 746-2
The compact safety controller TALOS® TB-I1403m from 0 to 99 h has incorporated the desired functionality in a flexible manner. The desired configuration can be selected and individual functions such as delay times can be parametrized directly on the device via the menu in an easy and quick manner. TALOS is certified according to the standards DIN EN 50156-1, 746-2 and IEC 61511-1.
The SK3D is an all-purpose safe coupling relay with three safe relaycontacts and is specially designed and certified for the use in furnaces and ancillary equipment in continuously mode according to EN 50156-1.
SR7D
The basic relay SR7D is a universally applicable safety relay, with which the moving parts of a machine or plant can be brought to a standstill in a hazard situation, quickly and safely.
MINOS SLxE - EN50156-1
The Safety emergency stop module MINOS SLxE fulfills max. requirements up to PL e / SILCL 3 (according to EN ISO 13849-1 bzw. IEC 62061). Test pulses at the safe output enable error detection during operation. The modules are also certified for continuous operation in furnaces according to EN 50156-1 as well as EN 746-2. For use in the process industry these modules are certified according to IEC 61511-1.
MINOS SLxD - EN50156-1
The Safety emergency stop module MINOS SLxD fulfills max. requirements up to PL d / SILCL 2 (according to EN ISO 13849-1 bzw. IEC 62061). Test pulses at the safe output enable error detection during operation. The modules are also certified for continuous operation in furnaces according to EN 50156-1 as well as EN 746-2. For use in the process industry these modules are certified according to IEC 61511-1.
Safe Coupling Relay from Zander
The SK3D is a classic, 22.5 mm wide safe coupling relay. It has 3 safe relays contacts which additionally to the actual coupling function offer a contact multiplication.
The safe coupling relay MINOS SD1K impresses with its ultra compact form. With a width of just 6.8 mm the SD1K meets all relevant standards for the safe coupling of safety-oriented signals in particular according to IEC 61508, IEC 61511, EN 50156-1 and EN 746-2.
SR7D Safe Coupling Relay
ZL-Series
Safety rope switches immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.
Different variants are available for different rope lengths. An additional emergency stop key can be mounted on both sides of the switches.
All accessories upon request can also be delivered in stainless steel.
ZLM
The Safety rope switch TLM immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.
ZLS
Safety rope switches immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. Different variants are available for different rope lengths. An additional emergency stop key can be mounted on both sides of the switches.
ZLMS
The stainless steel Safety rope switch ZLMS immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. With the ZANDER assembly / rope tensioning system ZTK, the pre-tension of the rope can be easily set so that green arrows are visible in the display window of the safety rope switch. This simplifies the assembly, troubleshooting and maintenance procedures.
ZLSE
The stainless steel Safety rope switch ZLSE immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.
ZL-Accessories
As the system supplier of safety rope switches, ZANDER offers all components tailored to suit your application.
Rope Tensioner-/ Gripper ZTK
For easy assembly and rope adjustment, use the ZANDER rope assembly system ZTK / ZTKE.
Eyebolt M8
Rope support eyebolts must be fitted every 3 m.
Ceiling hook
Optional, rope ceiling hook´s must be fitted each 3m. The rope must be supported by the ceiling hook no more than500 mm from the rope switch or the safety spring.
Universal-Pulley
The Universal-Pully is for proper rope deflection - suitable for indoor and outdoor use.
Safety Spring
The safety spring ist suitable for short rope spans
Thimble
The Thimble is used for fastening the rope with the spring
Rope
Used as pulling rope.
