Feature | Value |
---|---|
ZCode-PR RFID | |
Applications | High requirements on manipulation (high anti-tamper level), suitable for small and poorly aligned guard doors, sliding guards or protective covers |
Certified according to | ISO 13849-1; EN 62061, EN ISO 14119; EN 60204-1; EN 60947-5-3; EN 1088; UL508 |
Approvals | CE, TUV, UL |
Semiconductor outputs | 2 contactless safety outputs, 1 auxiliary outputs |
Auxiliary contacts | 1 |
Contact rating (safe- & auxiliary outputs) | DC 24 V, max. 200 mA, short circuit proof |
Supply Voltage | DC 24 V; +/- 15 %, max. 50 mA |
Switching distance | 5 mm, 10 mm close / 20 mm open |
Base material | Red PES (Polyester) |
Protection | IP67, IP69K (only Stainless Steel) |
Ambient temperature | -25 °C to +80 °C |
PL; Cat.; (EN ISO 13849-1; EN 62061) | PL e; Cat.4 |
Vibration- , shock resistance | 10-55 Hz / 1 mm, 1 ms / 30 g |
Weight, dimensions | 200 g, 50 x 25 x 13 mm |
Order No. with 5 m cable, mastercode, incl. actuator | 941104 |
Order No. with M12 connector, 30 cm cable, inclusive actuator | 941105 - (extension cable M12 connector 10 m Order No. 941200) |
Order No. with 5 m cable, unicode, incl. actuator | 941124 |
Order No. with M12 connector, 30 cm cable, inclusive actuator | 941125 - (extension cable M12 connector 10 m Order No. 941200) |
Accessories | |
Order No. spare actuator | 941109 (Mastercode) |
Order No. M12 extension cable, 10 m lengths, female, 8-wire, open end cable | 941200 |
ZCode-PR RFID 50x25x13 mm - safety switch
Downloads
ZCode-LR and ZCode-PR are tamper-proof, non-contact safety switches with magnetic as well as RFID technology for the use in the area of mechanical and plant engineering. This dual-channel and diverse principle once again increases safety. Activation is possible as unicode, i.e. only by a assigned actuator, or as mastercode, i.e. an actuator of the PR, LR series activates every switch of the ZCode-PR, LR series.
Up to 20 ZCode-PR, LR modules can be connected in series to the ZANDER safety relays or to a ZANDER safety controller.
The switching status is indicated by a LED. All the ZCode-PR, LR are dust- and water-proof (IP67) and have an additional indicator contact.