Feature | Value |
---|---|
ZLM | |
Applications | Protection of large hazardous zones, e.g. conveyor belts, extrusion plants and cutting machinery |
Certified according to | IEC 60947-5-5, IEC 60947-5-1, EN 60947-5-5, EN 60947-5-1, EN 60204-1, ISO 13850 |
Approvals | CE, TUV |
Safety contacts | 3 NC / 1 NO |
Contact rating, minimum load current | AC-15: 3 A / 240 V; DC 5 V / 10 mA |
Typical operating force, rope pulled | < 125 N |
Rope spans | 50 m |
Ambient temperature | -25 °C to +80 °C |
LED | - |
Housing | Die-Cast, painted yellow |
IP Rating | IP67 |
Mechanical reliability | 1.5 x 10⁶ operations |
Approx. weight | 675 g |
Order No. | 940020 |
ZLM - up to 50 m - safety rope switches
Downloads
Safety rope switches immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.
Different variants are available for different rope lengths. An additional emergency stop button, which is included in the package, can be mounted on both sides of the switches.
With the ZANDER assembly / rope tensioning system ZTK, the pre-tension of the rope can be easily set so that green arrows are visible in the display window of the safety rope switch. This simplifies the assembly, troubleshooting and maintenance procedures.