Coded RFID Safety Switches
The ZCode RFID Safety Switches are tamper-proof, non-contact safety switches with magnetic as well as RFID technology for the use in the area of mechanical and plant engineering. This dual-channel and diverse principle once again increases safety.
The Switches achieve a low coding level with Mastercode and high coding level with Unicode version according to EN ISO 14119. The switching status is indicated by a LED. All the ZCode RFID Switches are dust- and water-proof (IP67, ZCode-LRE: IP67K) and have an additional indicator contact.
|
|
Type |
Safety contacts /outputs (NO) |
Auxilliary contacts / outputs (NC) |
Temperature |
Width in mm |
Approvals |
Applications |
|
|
2 |
1 |
-25°C to +80°C |
50 x 25 x 13 mm |
CE, TÜV, UL |  |
|
|
2 |
1 |
-25°C to +80°C |
88 x 25 x 13 mm |
CE, TÜV, UL | |
||
|
2 |
1 |
-25°C to +80°C |
88 x 25 x 18 mm |
CE, TÜV |
|
||
|
2 |
1 |
-25°C to +80°C |
79 x 29 x 16,5 mm |
CE, TÜV | |
||
|
2 |
1 |
-25°C to +80°C |
98 x 55 x 32 mm |
CE, TÜV | |
These switches have a high specification plastic housings to allow the use in almost any environments, including high pressure cleaning following contamination from foreign particles (IP69K). Suitable and certified for the highest safety standards according to EN ISO 13849-1, 14119 and EN 62061.
This switch has a high specification stainless steel housings which allows the use in rough and hygiene critical environments (CIP / SIP Cleaning up to 105°C).
Up to 20 ZCode-modules can be connected in series to the ZANDER safety relays or to a ZANDER safety controller.
