ZCode-LCE 80x25x14 mm - stainless steel safety switch

     

 

All safety switches of the ZCode series operate in a Non-Contact manner via an encoded magnet system with a large switching distance and high tolerance against offset to the safety door. These can be actuated only with the actuator included in the scope of supply. The switching status is indicated by a LED.

The safety relays are completely dust- and waterproof (IP 69K). The difference lies in different housing variants. For example, type ZCode-LCE has a stainless steel housing for high temperature requirements or for high chemical resistance to environmental influences.

Feature Value
ZCode-LCE
Applications Suitable for small and poorly aligned guard doors,
sliding guards or protective covers
Certified according to ISO 13849-1; EN 62061, EN ISO 14119; EN 60204-1; EN 60947-5-3; UL508
Approvals CE, TUV, UL
Supply Voltage DC 24 V; +/- 15 %
Number of outputs 2 contactless safety outputs, 1 auxiliary outputs
Contact rating (safe- & auxiliary outputs) DC 24 V; max. 200 mA; short-circuit proof
Minimum load current DC 24 V; 1 mA
Switching distance recommented, maximum 5 mm, 10 mm close / 22 mm open
Base material Stainless steel 316
Protection IP67, IP69K (only Stainless Steel)
Ambient temperature -25 °C up to +105 °C
PL; Kat.; SILCL (EN ISO 13849-1; EN /IEC 62061) PL e; Kat.4; SILCL3*
Vibration-, shock resistance 10-55 Hz / 1 mm, 1 ms / 30 g
Weight, dimensions 200 g, 88 x 25 x 14 mm
Order No. with M12 connector, 30 cm cable, inclusive actuator 940147 - (extension cable M12 connector 10 m Order No. 941200)
Accessories
Order No. spare actuator 940149
Order No. M12 extension cable, 10 m lengths, female, 8-wire, open end cable 941200

Related Item / Accessorie