Ultra Slim Safety Relays

These ultra slim safety relays with a witdth of just 6 mm have one objective:

To provide a modular, costoptimized safety solution, which reduces everything to the essential:

  • wearless safe semiconductor outputs (MINOS SL series) or relay contacts for galvanically isolated switching (MINOS SD series)
  • high diagnostic via status and error LED´s
  • ultra slim - 6 mm - & cost efficient
  • variants for numerous applications (for monitoring emergency stop buttons, safety doors and light curtains, as well as contact reinforcement of safe outputs (e.g. safe PLC outputs) to machines and plants)
  • up to PL e / Kat. 4 / SIL 3

   

Likewise, all modules for use in combustion plants in continuous operation are certified according to EN 50156-1 and EN 746-2.

For use in the process industry, the modules are certified according to IEC 61511-1.

Basically one can differentiate between the following variants:

 

Type

Safety contacts /outputs

(NO)

Auxilliary contacts / outputs

(NC)

1 / 2 channel wiring

Width in mm

Approvals

Applications

Safety Relay

SD1E

1

1

1/2

6,8

CE, TÜV

SL1E / SL2E

1

1

1/2

6,8

CE, TÜV, cULus

SL1D / SL2D

1

1

1/2

6,8

CE, TÜV, cULus

Safe Coupling Relay

SD1K

1

1

1/2

6,8

CE, TÜV, cULus

 

MINOS SD: Safety Emergency Stop Relay with relay outputs

For high switching loads up to 6 A, AC 250 V and potential free switching the MINOS SD series is particularly suitable. With a width of just 6.8 mm these variants of the MINOS SD series offer the complete functionality of common safety relays.

For these products numerous applications are possible, such as the typical monitoring of emergency stop buttons and safety doors as well as monitoring light curtains or contact reinforcement of safe outputs (e.g. safe PLC outputs) to machines and plants.

The MINOS SD series is type approved and TÜV certified up to Cat. 4 / PL e according to EN ISO 13849-1 as well as SIL 3 according to EN ISO 62061 / IEC 61508. And they also meet the requirements for furnaces, ancillary equipment according to EN 50156-1 and EN 746-2 as well as IEC 61511-1 for the process industry. The MINOS SL series is already type approved and certified.

MINOS SD1E
The ultra slim safety emergency stop relay for monitoring emergency stop buttons, safety doors and light curtains.

MINOS SD1K
The ultra slim safe coupling relay for the safe contact reinforcement of safe outputs (e.g. safe PLC outputs) to machines and plants.

MINOS SL: Safety Module with semiconductor outputs

With the wearless safe semiconductor outputs of the MINOS SL series the highest safety level is achieved independently of the switching cycles, which is a special advantage by operation with high demand. Despite the minimal width, all modules of the MINOS series provide an I/O status LED incl. error LED. Extensive diagnostic options are therefore ensured, which facilitates greatly the installation and later maintenance.

SLxE
Variant for max. requirements up to Cat. 4/PL e (according to EN ISO 13849-1) and SIL 3/SILCL 3 (according to IEC 61508, EN 62061). Test pulses at the safe output enable error detection during operation.

SLxD
Variant for max. requirements up to Cat. 3/PL d (according to EN ISO 13849-1) und SIL 2/SIL CL 2 (according to IEC 61508, EN 62061). No test pulses at the safe output. Particularly suitable for the control of sensitive actuators.