Feature | Value |
---|---|
MINOS SLxE | |
Safety function | Safety emergency stop, safety doors, light curtains, contact reinforcement, OSSD, furnaces in continuous operation, stopp category 0 |
Certified according to | EN ISO 13849-1; IEC 62061; IEC 61508; EN 50156-1; EN 746-2; IEC 61511-1; EN 60204-1 |
PL; Kat.; SILCL (EN ISO 13849-1; EN 62061) | PL e; Cat. 4; SILCL 3 |
Approvals | CE, TUV, UL |
Supply Voltage | UB: DC 24 V (+/- 10 %) |
Power consumption at UB = 24V | 1.8 W (module enabled via S11. No load) |
Number dual-channel inputs | 1 |
Number start input | 1 (auto-start or manual start each variant) |
Max. switching capacity O1 ut UB. | max. 2.5 A (see derating in the operating instructions) |
Maximum switching capacity auxiliary output C1 | max. 100 mA |
Max. switch-on delay | 10 ms |
Max. Switch-off-delay (if requested via the safety circuit) | < 13 ms |
Ambient temperatur | -15 °C to 55 °C (see derating in the operating instructions) |
Protection | IP20 |
Mounting | 35 mm DIN-rail |
Dimension | 6.2 x 93.1 x 102.5 mm |
Weight | 50 g |
Manual Start: | |
MINOS SL1E, spring connection, manual start | 472820 |
MINOS SL1E, screw terminal, manual start | 472821 |
MINOS SL2E, spring connection, manual start | 472824 |
MINOS SL2E, screw terminal, manual start | 472825 |
Auto-Start: | |
MINOS SL1E, spring connection, auto-start | 472822 |
MINOS SL1E, screw terminal, auto-start | 472823 |
MINOS SL2E, spring connection, auto-start | 472826 |
MINOS SL2E, screw terminal, auto-start | 472827 |
MINOS SLxE safety relay with semiconductor output

Downloads
Operating Instructions MINOS SL (4.8 MiB)
Safety Parameter MINOS (381.4 KiB)
MINOS SL Cat. 4 Information (614.6 KiB)
Ordering Code MINOS Series SL (47.8 KiB)
Application Examples MINOS SL (309.3 KiB)
MINOS SL - Cat.4 / PL e / SILCL 3 Application Confirmation by TUV Rheinland (247.1 KiB)
TUV Certificate MINOS SL (693.5 KiB)
MINOS Overview - Find your right type (782.8 KiB)
EPLAN Macro SL1E, screw terminal, automatic start (183.6 KiB)
EPLAN Macro SL1E, screw terminal, manual start (183.6 KiB)
EPLAN Macro SL1E, spring connection, automatic start (183.7 KiB)
EPLAN Macro SL1E, spring connection, manual start (63.9 KiB)
EPLAN Macro SL2E, screw terminal, automatic start (183.9 KiB)
EPLAN Macro SL2E, screw terminal, manual start (183.9 KiB)
EPLAN Macro SL2E, spring connection, automatic start (183.9 KiB)
EPLAN Macro SL2E, spring connection, manual start (183.9 KiB)
UL Certificate of Compliance for MINOS SL group E135050 (599.2 KiB)
CE Declaration (257.4 KiB)
MINOS SLxE are safety emergency stop relays for monitoring emergency stop buttons, safety doors and light curtains, as well as for contact reinforcement of safe outputs (e.g. safe PLC outputs) to machines and plants.
The modules are also type-tested for furnaces in continuous operation according to EN 50156-1 as well as EN 746-2. For use in the process industry these modules are certified according to IEC 61511-1.
SLxE:
Variant for max. requirements up to PL e / SILCL 3 (according to EN ISO 13849-1; IEC 62061). Test pulses at the safe output enable error detection during operation.
SL1E for dual-channel emergency stop circuit, safety door monitoring with short circuit monitoring
SL2E for light curtains, contact reinforcement, OSSD output or single-channel emergency stop
There are variants with manual start or auto-start.
These Module are available with screw terminals or spring connection.