| Feature | Value |
|---|---|
| ZStop-SE | |
| Corresponds to the standards | EN ISO 13850; IEC 60947-5-5; UL508 |
| Approvals | UL |
| Safety Contact Type | IEC 60947-5-1 Douple Break Type Zb |
| Contact material | silver |
| Termination | Clamp up to 2.5 sq. mm conductors |
| Rating | Uitlization Category: AC15 |
| Operational Rating | AC15 A300 240V. 3A/120V 6A AC |
| Thermal Current (Ith) | 10A |
| Rated Insulation Voltage (Ui) | 500V |
| Withstand Voltage | 2500V |
| Short Circuit Overload Protection | Fuse Exernally 10A (FF) |
| Body material | Plastic (ZStop-S), Stainless steel 316 (ZStop SE, LE,LEL). |
| Protection | IP69K Stainless Steel (NEMA 6), IP67 Plastic |
| Temperature range | -25°C to +80°C |
| Mechanical Reliability B10d | 1.5 x 10 (superscript 6) operations at 100mA load |
| ISO 13849-1 | up to PLe depending on system architecture |
| EN 62061 | up to SIL3 depending on system architecture |
| EN 62061 | up to SIL3 depending on system architecture |
| Order No. ZStop-SE (Stainless Steel) | 941601 |
ZStop-SE emergeny stop switch
Compact Stainless Steel ZStop-SE (3pole)
All Emergency Stop Switches conform to European Standard EN ISO 13850 and IEC 60947-5-5. They have a positive mechanical linkage between the switch contacts and the E-Stop Button. The switches are mechanically latched and can then only be returned to the operational condition by pressing the reset button as required by EN ISO 13850 and IEC 60947-5-5.